September
4

The Windows Registry store the system configuration settings of the operating system and the applications installed on it. If the registry files get corrupted, then the system fails to recognize the operating components as well as the applications and the whole system becomes inaccessible. Though options are there to repair and replace the registry files, the process is quite complex and tedious. Hence, for faster and safe recovery of the data it is better to opt for any Windows data recovery utility.

Scenario:

While trying to start or restart your computer with Windows XP operating system, the system ceases to boot further. The system displays an error message and hangs during the booting process. As the system fails to boot, the data in the drive remains inaccessible and any Windows data recovery software is a wiser choice to get back your valuable data. The error message can be any of the following:

Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM

OR

Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSOFTWARE

OR

Stop: c0000218 {Registry File Failure} The registry cannot load the hive (file): SystemRootSystem32ConfigSOFTWARE or its log or alternate

OR

Stop: c0000218 {Registry File Failure} The registry cannot load the hive (file): SystemRootSystem32ConfigSOFTWARE or its log or alternate

Cause

The most likely cause behind the above instances of error messages is that the registry of the operating system has been corrupted.

Resolution

To resolve this operating system registry issue, you have to repair or replace the corrupted registry files. In order to replace the files, first you have to take backup of the old registry files, repair them and again place them in the registry folder. The following steps can guide you for the same:

Try inserting the Windows XP CD and restart the computer. Prior to this, inside BIOS, change the boot device as the CD-ROM drive.

Go to the Recovery Console command prompt and enter the following lines:

md tmp

copy c:windowssystem32configsystem c:windowstmpsystem.bak
copy c:windowssystem32configsoftware c:windowstmpsoftware.bak
copy c:windowssystem32configsam c:windowstmpsam.bak
copy c:windowssystem32configsecurity c:windowstmpsecurity.bak
copy c:windowssystem32configdefault c:windowstmpdefault.bak

delete c:windowssystem32configsystem
delete c:windowssystem32configsoftware
delete c:windowssystem32configsam
delete c:windowssystem32configsecurity
delete c:windowssystem32configdefault

copy c:windowsrepairsystem c:windowssystem32configsystem
copy c:windowsrepairsoftware c:windowssystem32configsoftware
copy c:windowsrepairsam c:windowssystem32configsam
copy c:windowsrepairsecurity c:windowssystem32configsecurity
copy c:windowsrepairdefault c:windowssystem32configdefault

The above step takes the temporary registry that is generated during system start-up. This process may start the system, however data may remain inaccessible. Hence, you need to go to the previous restore points and copy the registry from their.

The above steps may resolve the issues, however, sometimes unavailability of restore point or recent backup, leaves the data inaccessible. This situation has only solution, that is to recover the data by using a powerful windows data recovery software.

These Windows data recovery software are developed to locate and recover the data from the storage media irrespective of the data loss situation. More over, these utilities are very easy to use and does not even require any technical knowledge.

Stellar Phoenix Windows Data Recovery is one of the finest windows data recovery utility to recover any lost or inaccessible data from the system. Even, you can have a preview of the recoverable files before originally recovering them and make a customized recovery of the files you want first.

About the Author:
Hello everyone. I am a software analyst here is a piece of my research on data recovery software to recover windows files and also analyses how to perform windows data recovery

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
0
September
3

Most of computer users are annoyed when they get a slow Windows laptop and they have no idea about how to fix the slow Windows laptop. You may be frustrated so much while you experience the laptop freezing, crashing and hanging up again and again. There are some main causes to make your computer run slowly. If you want to fix your slow Windows laptop, what you need to do is just to follow my tips on the article and your pc will run faster.
1). There may be insufficient RAM on your laptop. Lack of RAM is the common cause of your machine slowdown, which means your pc is in poor performance. No matter what your computer does, it needs RAM to support the tasks. Thus, the more applications you run, the slower your laptop becomes. In this case, you need to disable some unwanted applications and tasks on your computer, or purchase the additional RAM for Windows. Then, you can resolve your slow Windows laptop.
2). There are a great number of junk files on your laptop. If you have maintained your pc for a long time, the invalid and unnecessary files eat up a lot of your laptop resources. That is why you get a slow Windows laptop. To fix this problem, you need to clean up the unwanted temp files, cookies and browser’s record to free up your machine. Thus, you can apply Windows Disk Cleanup Tool to handle the job by the following instructions. Click My Computer> Right-click Local Disk> Click Properties> Click Disk Cleanup
3). Your Windows registry might be invalid or corrupted. If you get a slow Windows laptop, it is definitely related to the Windows registry. Over time, you install the new programs and uninstall the unwanted program from time to time. There are thousands of junk data storing in the Windows registry entries. This absolutely causes your pc to runs slowly. If this is the case for you, you need to apply the best registry cleaner to clean up the corrupted Windows registry entries. But, don’t fix the Windows registry by manual, otherwise you whole Windows might be damaged.

About the Author:
Are you looking for the best Registry Repair Download? Read the author’s review of the Best Registry Repair on the market now at http://www.bestregsoftware.com/ and completely clean up your computer registry in 2 minutes!

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
0
September
3

Have you ever got the Kernel32 DLL error message? You are prompted that Kernel32.dll error in a small windows while you are stating up your computer, running or opening a new program. In this case, your computer becomes crashed and your Windows system is at risk. This might make you feel frustrated while you are working on computer. If you do not want to lose some important data and save your working time, you should fix Kernel32.dll error immediately.
Cause of Kernel32.dll error
There are some of the frequent reasons why Kernel32.dll error occurs. Windows DLL becomes corrupted due to enormous buildup of junk files stored in Windows registry; it can also occur when you keep on doing installation and uninstallation of programs on your computer.
How to fix Kernel32.dll error effectively?
At the beginning, you need to check out the CUP of your PC to make sure if it is overheating or there is a lot of dust on the fan. In this case, you can use blower to handle it. Besides, you need to confirm if the CPU is over frequency. And then you should reset it to Windows default values.
Meanwhile, if you want to fix Kernel32.dll error, you can download another new Kernel32.dll file from the reliable sources online and place it at its specific location. However, you need to be careful when you operate this process due to it requires superior technical skill to identify the correct location of this file where it should be located or replaced.
What’s more, in order to fix Kernel32.dll error, you need to use a registry cleaner program which can enable you to check out what wrong with Kernel32.dll, and fix it with the powerful utility in minutes. Registry cleaner can not only fix DLL error, but also fix the other computer problems. It is the best nurse for your computer.

About the Author:
Are you looking for the best Registry Repair Download? Read the author’s review of the Best Registry Repair on the market now at http://www.bestregsoftware.com/ and completely clean up your computer registry in 2 minutes!

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
0
September
3

While your PC gets runtime error 429, there are some runtime errors symptoms including program freezes, system lock-ups, slow computer performance, startup/shutdown problems and installation errors. Those are why you should solve the runtime problems in your pc. What’s worse, your Windows system will be destroyed by this error.
It is so easy for you to fix the run time problem on your own so that you can save a lot of money from fix runtime error 429 on the computer shop. Just follow the 4 step-by-step guides below:
1.Free download the registry repair tool
2.Launch it after finishing the installation
3.Click “Scan Now” button
4.Click “Repair Problems” button and fix the error
How to Fix Runtime error 429 instantly?
What are the causes?
Run time error messages that crop up while the computer is in operation can be generated by various different sources including the system BIOS, the operating system, hardware driver routines, or application software. It is usually possible to determine roughly what is causing the runtime error 429, since application-specific messages usually mention the application that is generating them. Also, hardware or system problems can cause the runtime problems.
What are the solutions?
1.You need to check if the runtime error is caused by software installed after the Windows installation. Use the Windows Task Manager to close all applications. Then reboot the PC.
2.Update the antivirus on your system to protect it from damaging the program folders. Scan the PC for viruses.
3.If your software is out of date, you may need to update to ensure that they run properly.
4.When certain files may be damaged or missing, you need to repair the files.
5.While the above tips related to programs, the errors can also be caused due to damaged hardware. If that is so, you may need to contact the dealer you bought the PC from to fix the error.
6.Turn on the script debugging option in Internet Explorer.

About the Author:
Are you looking for the best Registry Repair Download? Read the author’s review of the Best Registry Repair on the market now at http://www.bestregsoftware.com/ and completely clean up your computer registry in 2 minutes!

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
0
September
3

At the beginning, you need to analyze why your laptop becomes slow. There are some possible reasons.
# Not Enough RAM Memory
# Too Many Junk Files
# CPU overheating
# Windows Registry Errors
# Malicious Programs Infection
If you want to fix slow laptop computer, you should confirm when you computer becomes slow. At that moment, what had you done on your computer? Maybe you were playing a 3D internet game and you just need to change a faster processor and add more RAM memory.
To fix your slow laptop, if you have used your machine for a long period without maintaining, there might be too many invalid files on your PC. In this case, you need to clean up the junk files and duplicate documents from your PC.
Your laptop runs slowly might be caused by the suspicious plug-ins which is installed on the Internet Explorer without your permission. The suspicious plug-ins can eat up lot of your resources on your PC. You need to disable the suspicious plug-ins to fix the slow laptop and some Internet Explorer errors.
If your laptop is not usually slow and it slows down suddenly or runs more and more slowly over time. It is possible that your machine gets virus, spyware, Trojan infection. To fix slow laptop, the best spyware scanner can remove the threat information effectively and quickly.
One more thing, if you get a slow laptop, Widows registry errors are definitely one of the main reasons. Even though you know what the Windows registry is, do not fix it by manual due to this operation will damage your whole system. Just use the best Windows registry repair software to fix the Windows registry errors automatically and quickly.
Although you can purchase a new computer, you still need to know some tips to always keep your computer running as well as the new one.

About the Author:
Are you looking for the best Registry Repair Download? Read the author’s review of the Best Registry Repair on the market now at http://www.bestregsoftware.com/ and completely clean up your computer registry in 2 minutes!

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
0